They cloned a sheep once, and that sheep had every thing
similar to its clone source, except of course it's memories. With your hard
drive on the other hand, you can copy its memory, every last bit of it, and
restore it on a completely different hard drive.
Cloning your hard drive is something that a person needs to
do or at least wants to do, once in their life. The fact is hard drives go bad
sometimes, and other times people plain old just want to get a new one with
more storage capacity. Either way, wouldn't it be nice to be able to get a new
hard drive and make it have the exact same data as your old one, so you could
pick up right where you left off?
Think about it, that means you wouldn't have to reinstall
your operating system, put all of your important data on it, or even set all of
those pesky little preferences back to the way you want it. They would already
be done, because you just made a clone of your old hard drive, and all data will
be exactly the same. So how can you accomplish this?
The best way to clone your hard drive, and easiest, is to
use a good hard drive imaging software. If you plan to use cloning software,
all you have to do is insert the disk, follow its instructions and then it will
start the cloning process. You may be wondering where you save your data image
too. Well believe it or not, you can actually save it on the hard drive that
you just made the image from, but of course if more then half is being used by
data, it will not fit.
Your other option then is to store it on a DVD, if it can
fit, or the hard drive you actually plan on copying it to. That is what you
want anyways right? The reason that is not the best option though, is because
you would have to open up your computer and attach it to the same IDE cable
that you current hard drive is attached to.
Then you would have to partition and format the new drive, and
then and only then, you could start the immediate transfer of data from one
hard drive to another.
Long process huh? Thought so, but don't worry, you still
have some other options. You could also use RAID technology, which stands for
Redundant Array of Independent Disks. RAID basically works like this; you have
two hard drives in your computer and they both are at least the same size and
are attached to the same IDE cable. Then, whenever data is written to your main
hard drive, it is also written to your backup one.
This means that you would have an always, up to date hard
drive clone at all times. So if anything should happen, you can just boot from
your other hard drive, and presto, you're in like Flynn.
On a final note, you need to understand that RAID won't help
if you have a fire, tornado or some other disaster that might destroy your
entire computer. For this reason, I don't really recommend anybody uses RAID,
but instead do a backup weekly and store it on some kind of external storage
device.
External storage devices can range from zip drives,
DVD-R's, external hard drives, and anything else that can store large amounts
of data, but not be in your computer. If you do that, and store the external
data in a safe place, then you will forever be safe guarded against virus
attacks, disasters, and anything else that might come your computers way.
Get the software that you need to clone your hard drive, on
Michael's
hard
drive image software page. Also, learn more about
computer
customizing at his helpful web site.